PDA

View Full Version : Small block chevy oil level height.



Driver50x
04-14-2014, 03:12 PM
Does anyone know how far down the oil level should be below the pan rail? I need to weld a bung on my oil pan to check the oil level. I don't have enough room for a dipstick.it is a first generation engine.

Krooser
04-14-2014, 08:33 PM
Our Champ pans have a fill plug on the top of the kick out… the level needs to be just below the top of the plug. Yours may be different...

Driver50x
04-15-2014, 08:10 AM
Would you mind measuring it for me? How many inches down from the oil pan rail is the oil level?

let-r-eat
04-15-2014, 02:57 PM
What pan are you using? 7" deep? 7.25" 7.5" or stock?

Krooser
04-15-2014, 10:22 PM
here's a photo from Champs website… the race engine is 200 miles from me so a photo wasn't possible.

Driver50x
04-16-2014, 08:03 AM
The pan is 7.5 inches deep. Moroso part number 21316

Krooser
04-17-2014, 05:40 PM
I think you'll be OK if the oil level is just at, or slightly below, the bottom of the front part of the pan. Just keep it below the crankshaft.

speedbuggy
04-18-2014, 09:13 AM
Can't you just put 7-8 quarts (whatever you are running) of water in the pan an measure it?