ace1
04-17-2014, 05:52 AM
16" budget aluminum seat, no cover 25.00
2 5 x 11 springs, 1-150, 1-175 5.00 ea.
modified headers, turn straight out type, no dents 45.00
30 1/2" driveshaft, 2" steel, with yoke 45.00
D&M brake bias gauges 30.00
30" 2/0 ga. battery cable with ends 10.00
new and used 3/4" steel swedge tubes 1-16", 4-17", 2-18", 1- 24", 1-12" 5.00 ea.
2 new 5/8 steel swedge tubes 1-10", 1-11" 5.00 ea.
2 adjustable spring spacers 10.00 ea.
2 new G/N axle snout seals 3.00 ea.
2 new inner axle seals for 2 1/2" tube (gold) 25.00 ea.
1 new stock chevy rubber trans mount 3.00
1 new quad. to holley or spread bore to square bore carb adaptor 10.00
1 new mustang II lower control arm bushing 3.00
I have a 62-69 327 small journal engine with factory forged crank. Partially disassembled, crank and cam still in block, turns free, cylinders look good. If the pistons are for this block they are .060 so I assume the block is also. Harmonic damper, heads (not double hump), pan, ram horn manifolds included. I have pistons and rods but they are no good. I got it over 10 years ago and haven't touched it since. Make a good offer.... 662-882-0575
2 5 x 11 springs, 1-150, 1-175 5.00 ea.
modified headers, turn straight out type, no dents 45.00
30 1/2" driveshaft, 2" steel, with yoke 45.00
D&M brake bias gauges 30.00
30" 2/0 ga. battery cable with ends 10.00
new and used 3/4" steel swedge tubes 1-16", 4-17", 2-18", 1- 24", 1-12" 5.00 ea.
2 new 5/8 steel swedge tubes 1-10", 1-11" 5.00 ea.
2 adjustable spring spacers 10.00 ea.
2 new G/N axle snout seals 3.00 ea.
2 new inner axle seals for 2 1/2" tube (gold) 25.00 ea.
1 new stock chevy rubber trans mount 3.00
1 new quad. to holley or spread bore to square bore carb adaptor 10.00
1 new mustang II lower control arm bushing 3.00
I have a 62-69 327 small journal engine with factory forged crank. Partially disassembled, crank and cam still in block, turns free, cylinders look good. If the pistons are for this block they are .060 so I assume the block is also. Harmonic damper, heads (not double hump), pan, ram horn manifolds included. I have pistons and rods but they are no good. I got it over 10 years ago and haven't touched it since. Make a good offer.... 662-882-0575