Setting motor in pierce car

[TDR]

Putting together 06 pierce car and noticed there is a gap at the lf motor mount and engine appears to be running uphill.. I'm thinking the front end is bent.. Is this normal or is the front end twisted?

[Lizardracing]

My car doesn't line up either if sitting on jack stands squarely. The Chassis flexes a bit.

[1Blacksheep]

Its Bent ! Most of them are after 3 races .......

[bob75]

wow , i got a car with 40 nights , and my motor goes in with no problems (not bent).

[99gill]

What motor are you running, if its a Ford motor then you have to cut the mounts down an inch. I called the chassis manufacture and they said i had to with my 04 pierce when i put my motor in.

[Racer111]

Make sure your bolt on mounts on the engine aint bent.Seen that many of times..