Metric 3 inch ride height

[The deMORRILLizer]

Hey Guys, Im building an Asphalt limited late model, is basically a metric chassis but you can switch the rear end to three link how ever you want and there is a three inch ride height rule. What is the best way to get a metric that low and still have a functioning front suspension, drop spindles?. Also what can i do to improve bump steer. rules state is has to be oem parts but can interchange between makes and models. Any help would be greatly appreciated

[LOGANSTANFORTH]

You can run a set of #2 GM spindles from a round body Impala caprice which will help your front geometry and make the front track 2 inches wider BUT, drop spindles for those cars are $400+ a set and only one company builds them....

Get a set of metric drop spindles and run a taller balljoint if you want to lower the car...