View Full Version : Brake Bar
hasben
12-31-2014, 09:38 AM
If you are running a short straight pan-hard bar would there be any advantage by putting a brake bar (not a torque arm - 5th coil lift bar) on the car too? Thanks
Cheatah19
01-02-2015, 07:09 PM
Yes. It will make the car more stable on corner entry. Just check your rules before doing so. Most state that you can only run one torque absorbing device.
hasben
01-02-2015, 08:46 PM
This is just an arm with a chain to limit pinion angle and it only works when on brakes. Thanks most inspections around here are pretty lax.
Cheatah19
01-02-2015, 09:58 PM
It will still make entry more stable when used with a pull bar. You have to take the brake bushing off of your pull bar when doing this.
hasben
01-03-2015, 06:04 PM
Thanks, we will try that.
washeduptoo
01-03-2015, 06:54 PM
Why do you take the brake bushing off pull bar? We have run the brake bar but no one told us to remove that bushing? Thanks
Cheatah19
01-04-2015, 10:36 PM
Leaving the brake bushing is defeating the purpose of having the brake bar
washeduptoo
01-05-2015, 04:58 AM
Thanks for the information.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.