Meier20
01-12-2015, 01:31 PM
Shepherd Engine Development
434 ci
Freshened and updated 4-14 parts with a (n) after them were replaced new in April.
Set up for 5 stage dry sump system
HVH CNC ported 15 deg heads, with matching intake
Dart Aluminum block
o 4.170 bore
o 50mm cam bore
o .903 lifter diam.
Lunati Pro series crankshaft
o 4.00 stroke
o 350 main
o 2.100 rod pins
Manley dirt series 300m rods (n)
o 5.850 long
o .927 pin
o ARP 625 bolts 7/16
Custom CP pistons w/DLC pins (n), Total seal rings, T&D rockers, 7/16 pushrods (n), BAM .904 lifters (n), Coated Ti valves (n), ISKY tool room springs(n), Fab covers with spring oilers (n), Champ pans aluminum oil pan (n), MSD distributor, Scotts plug wires (n), Fragola plumbing (n), CV Billet fuel pump, Calico coated Clevite rod and main bearings, Cloyes timing set.
Comes with
-Stealth 750 Carb (New in 2014)
-Beyea Tri Y Headers (New in 2014)
Contact 319-325-6024 or 920-369-6238
$16,500 with headers and carb. Willing to drop price and/or sell without carb and headers if picked up at the track.
434 ci
Freshened and updated 4-14 parts with a (n) after them were replaced new in April.
Set up for 5 stage dry sump system
HVH CNC ported 15 deg heads, with matching intake
Dart Aluminum block
o 4.170 bore
o 50mm cam bore
o .903 lifter diam.
Lunati Pro series crankshaft
o 4.00 stroke
o 350 main
o 2.100 rod pins
Manley dirt series 300m rods (n)
o 5.850 long
o .927 pin
o ARP 625 bolts 7/16
Custom CP pistons w/DLC pins (n), Total seal rings, T&D rockers, 7/16 pushrods (n), BAM .904 lifters (n), Coated Ti valves (n), ISKY tool room springs(n), Fab covers with spring oilers (n), Champ pans aluminum oil pan (n), MSD distributor, Scotts plug wires (n), Fragola plumbing (n), CV Billet fuel pump, Calico coated Clevite rod and main bearings, Cloyes timing set.
Comes with
-Stealth 750 Carb (New in 2014)
-Beyea Tri Y Headers (New in 2014)
Contact 319-325-6024 or 920-369-6238
$16,500 with headers and carb. Willing to drop price and/or sell without carb and headers if picked up at the track.