PDA

View Full Version : Emod set up help



wayne36
04-07-2015, 11:59 PM
I am running a older Howe chassis with mono leaf rear with coil over eliminators and floater 9 and will be running on 3/8 dirt tracks. were is a good starting point as far as set up for this car?FrontLF 700 RF 650LR 175 RR 175 coil over elimenators 55lb mono Leaf

Dirtrunner35
04-09-2015, 10:35 AM
I had a early 2000 ellis with that set up, tacky and rough was great when it slicked off forward bite was alot less

wayne36
04-09-2015, 11:07 PM
Do you know a baseline for setup? or what worked best

Dirtrunner35
04-13-2015, 03:01 PM
Same springs that you have, about 80-120 lr bite I always ran in the moisture on the bottom with this car if not forward bite wasn't the best.

wayne36
04-20-2015, 03:26 PM
Thank you for your help