drive off turns

[Deish98]

How do I get drive off turns my race car handles great and I'm driving it as hard as I can but it won't get the drive off the turns I can give more I'm information if possible

[langdonracing48]

You mentioned you're "driving as hard as you can". If you're driving into the corner too hard you'll never have a decent exit. Definitely need to post your setup info to get some help.

[Deish98]

I had the drive be4 I just put a piece of lead on the left rear and the drive went away

[Confused?]

Did you reset the LR bite after adding the lead?

[Flyin Iowan]

just curious, why did you put the lead on the LR? Did the car handle before you added the weight?

[Anonymous24]

What are your real link lengths? Having your Wheel base would help too.

[Deish98]

Yes and be4 I added it my scaling percentages with driver were left side 53.4 rear 57.1 and 28lbs of bite and I had lot of drive after I added it I lost the drive and the percentages were with driver left side 53.8 rear 57.9 and 28lbs of bite

[save the racers]

We had an old car that if you put lead on it for dry slick.It would be loose at apex and you couldn't get back on the gas fast enough to use the rear %.We left it at 56% and just tightened it up for slick.

[powerslide]

Did you add the weight low or high? The LS% seems a little low and rear a little high.