PDA

View Full Version : B Mod help with gearing



ride height
06-06-2015, 04:43 PM
We run a little 2bbl motor against crates. Its our first year and we can run towards the front but there are a couple cars who dont seem to labor like ours and we cant catch them but were not far behind. My question is should i try a higher gear (lower number) ? We run a 583 with a brinn. Ford type rear end. Not quick change. Turn maybe 6800. When the track blows off even a little. We blow the tires clean off it and its frustrating. The car handles awesome and goes thru the turns as good as you can expect . Im wondering if maybe go down to 564 and see if we can still turn 6800. 3/8 mile. Im all ears to anybody who would care to help. Our motor man says were done making power at 7000. But we cant even keep the tires under it at 6500. There has to something im missing. Our motor makes more hp on paper than the crate. Its a good piece. So i dont think were out motored. Anyway. Thanks in advance .

bob75
06-06-2015, 07:10 PM
Usually when the track slows down you put more gear in it

Fox_hunter42
06-07-2015, 12:49 AM
if your spinning now it will get worse with a 564

25drtrkr
06-07-2015, 01:29 PM
Sounds like chassis problem not gear. Post your setup, and see if we can help.

ride height
06-07-2015, 02:28 PM
Pm sent to drttrkr