PDA

View Full Version : UMP Super stock setup?



BR77
07-13-2015, 11:25 PM
Wanting some advice on set up. I have a 1000 in LF a 950 Rf 275 lr 225rr . 55% rear and cross is about 53%. About 190lbs in left rear. Car drives pretty good but struggling get of the corner. Not sure what the affects of more left rear will do. I have been told to much can make it loose off. Any suggestions?

racing_kid
07-14-2015, 09:26 AM
More lr should free it up getting in and tighten coming off. What kind of car? Metric?

Fox_hunter42
07-15-2015, 06:35 AM
switch front springs, that will help carry more load on rear tires. May need to make rf 1100 instead of 1000

koltveitracing67
07-15-2015, 01:18 PM
I would go with 200 spring on RR and 250 on LR and increase to 225 on bite.

koltveitracing67
07-15-2015, 01:19 PM
And increase rear % to 57

floppyfoot
07-20-2015, 09:24 AM
I am not going into all of our setup but, we run a lot of LR bite, 444#, LR spring is a 16" 200 and RR is a 13" 275, LF is 1000 and RF 1100. The car handles great on a dry slick or a tacky track.