Cam selection to compete with the 602

[fastpro28]

I'm looking for advice into cam selection for a built motor to compete with the 602. I race at a 1/3 mile oval and it has tight corners slightly banked. My motor is a 358 with World Product heads with Scatt crank and rods, flat top pistons, 2101 intake and 4412 carb HEI ignition, now I have Isky cam lift 485 duration 232 at 106 lobe, and I am getting pulled out of the corner by anybody with a 602, need help selecting a cam that can provide enough stump pulling power to match or beat the 602. Any help would be great.

[dereksehi]

What kind of rpm are you running? Is your current cam solid or a hydraulic? Also are the crates running a 4412 also and are they limited rpm?

[fastpro28]

I'm running 6300 hydraulic and yes we all use the 4412 and no limit on RPM.

[fastpro28]

Track rules we must run a hydraulic cam.

[stock car driver]

World heads aren't as good as vortec

[25drtrkr]

Some tracks in my area are letting racers use the EQ Vortecs. We ran a set on a llm for 2 years with no problems . Our engine builder really liked them for our application. It made 512hp with flat tops and 3310 Holley.

[50j]

More gear and a cam that allows more rpm should help.

[fastpro28]

Our track doesn't allow Vortec heads on an open motor, World heads are my only option unless I go to factory heads and no 300 horse heads allowed.

[stock car driver]

World but not eq?

[hatchet]

First off this web site logs me out before i finish . We race with a built motor Have to wt. 3300 . 602s 3000 . we pull a 6:83 gear and turn 6800 to 7000 . 602s pull a 6:50 gear and turn 6600 to 6800 . Now i know none of these are cheated up 602s . Not . I would like to run one of there motors and lose 300 lb. and pull the same gear . They should be on the valve float . Last year we had a motor that turned 7600 plus with the same gear . Won some races . I guess over the winter i will build a 7:20 gear for next year .

[Krooser]

Mike Jones can fix you up… he sells lots of cams to guys with sealed *cough* crates.

www.jonescams.com

[stock car driver]

First off this web site logs me out before i finish . We race with a built motor Have to wt. 3300 . 602s 3000 . we pull a 6:83 gear and turn 6800 to 7000 . 602s pull a 6:50 gear and turn 6600 to 6800 . Now i know none of these are cheated up 602s . Not . I would like to run one of there motors and lose 300 lb. and pull the same gear . They should be on the valve float . Last year we had a motor that turned 7600 plus with the same gear . Won some races . I guess over the winter i will build a 7:20 gear for next year .

Id buy a 602, guys around here run them well over 100 nights.