zeroracing
09-08-2015, 07:27 PM
Random Order
Afco 2.5” ID Coil Over Springs
10” Long 300, 550 (or 500 number partially rubbed off), 450, 400
12” Long 225, 225
14” Long 175, 200, 250
$ 7 Each or all nine for $ 50
Front spindle set, wide 5 late model, tall with short steering arm, unknown brand $ 25 for Both.
Front wide 5 hubs (2), bearings, covers, standard rotors. $ 45 set.
Appleton Rack with Servo, bought used from Crebo Racing Parts, they assured it worked. 19.25” long, 3.4 on it. $ 225.
Brake Pedal, Dual Howe Masters (7/8” and 1” bore) with adjuster $ 100
BSB Quick Change Pinion J Bar Mount, Slider style with spacers $ 70
Wilwood rear wide five hubs, bearings, 8 bolt drive flanges, drilled rotors (2 total) $ 100 for the set.
CV Products Aluminum J Bar, 5 inch Arch, Range about 17 5/8” to 19 3/4” $ 50
BSB J bar Mounts (Frame side) 2” square $ 25
1.5” square $ 10
Steel J-Bar 22”-24” $ 10
Steering Column Parts - two U joints, 2 support heims, Hex Disconnect with steering hub. $ 30
2 Wilwood calipers, 5.5” mounts, 4 piston fits narrow rotors, not sure if dynalites or what. $ 20 for both.
Afco Swing Arm (short, 12.5” long w/o heim, with heim 14” long) $ 5
2 Aluminum Clevis, for linkages, never used $ 5
2 Battery boxes one 12” wide, one 10.5” $ 5 each
Kirkey 15” Seat with cover, basic seat $ 25
Gauges and Warning lights, 2 fuel pressure (only one works other does not light up), Water temp, Oil, Warning lights, Switch and push button. $ 40
Dominator Plastic Hood Scoop, Carbon Fiber look used but good $ 5
Power Steering tanks, one dented but no leaks other good $ 15 good one $ 10 Dented one
Griffen Aluminum Radiator 19” tall by 24” wide, pinhole repair, no leaks $ 50
Powertrain industries mod driveshaft 32.5” long no yoke $ 40
Edlebrock Alky Fuel Pump SBC $ 10
Carter Gas Pump $ 10
Victor Jr. Intake, good condition $ 200 firm
Hitachi Mini Starter, Block Mount SBC $ 50
CVR Mini Starter, Pro torque Model $ 125
Mini Starter, Cracked mount but works $ 25
2 Carbon Fiber Beadlock 15x12 wheels, 4” BP. $ 80
Pro-Pan aluminum dry sump pan, has been repaired $ 125
Axles all gundrilled, 37” &34” for $ 60 total
Snap On 14.4 v impact, 3/8”. Charger broke, tool works just cant recharge so stopped using, still has some charge. rough looking but great tool. $ 40
SBC Wet Sump pan, dual kickouts, dipstick, windage tray, needs good cleaning. $ 100
2” Setback steel motor mounts (SBC) $ 5
6 blade 18” fan $ 10
Chrome 14” air cleaner assembly $ 5
3 new american racer tires, never raced, all MD 56 tires, 28.5-11.0-15R, 28.5-11.0-15DTW, and 29.0-11.0-15DTW $ 15 each.
32 gal ATL fuel cell with steel can $ 50.
I have pictures of everything, can get you measurements as needed. Call or text 417-860-4909 or message me. All prices do not include shipping and I will not ship anything that UPS will not take. Please no text or calls after 9pm central.
Afco 2.5” ID Coil Over Springs
10” Long 300, 550 (or 500 number partially rubbed off), 450, 400
12” Long 225, 225
14” Long 175, 200, 250
$ 7 Each or all nine for $ 50
Front spindle set, wide 5 late model, tall with short steering arm, unknown brand $ 25 for Both.
Front wide 5 hubs (2), bearings, covers, standard rotors. $ 45 set.
Appleton Rack with Servo, bought used from Crebo Racing Parts, they assured it worked. 19.25” long, 3.4 on it. $ 225.
Brake Pedal, Dual Howe Masters (7/8” and 1” bore) with adjuster $ 100
BSB Quick Change Pinion J Bar Mount, Slider style with spacers $ 70
Wilwood rear wide five hubs, bearings, 8 bolt drive flanges, drilled rotors (2 total) $ 100 for the set.
CV Products Aluminum J Bar, 5 inch Arch, Range about 17 5/8” to 19 3/4” $ 50
BSB J bar Mounts (Frame side) 2” square $ 25
1.5” square $ 10
Steel J-Bar 22”-24” $ 10
Steering Column Parts - two U joints, 2 support heims, Hex Disconnect with steering hub. $ 30
2 Wilwood calipers, 5.5” mounts, 4 piston fits narrow rotors, not sure if dynalites or what. $ 20 for both.
Afco Swing Arm (short, 12.5” long w/o heim, with heim 14” long) $ 5
2 Aluminum Clevis, for linkages, never used $ 5
2 Battery boxes one 12” wide, one 10.5” $ 5 each
Kirkey 15” Seat with cover, basic seat $ 25
Gauges and Warning lights, 2 fuel pressure (only one works other does not light up), Water temp, Oil, Warning lights, Switch and push button. $ 40
Dominator Plastic Hood Scoop, Carbon Fiber look used but good $ 5
Power Steering tanks, one dented but no leaks other good $ 15 good one $ 10 Dented one
Griffen Aluminum Radiator 19” tall by 24” wide, pinhole repair, no leaks $ 50
Powertrain industries mod driveshaft 32.5” long no yoke $ 40
Edlebrock Alky Fuel Pump SBC $ 10
Carter Gas Pump $ 10
Victor Jr. Intake, good condition $ 200 firm
Hitachi Mini Starter, Block Mount SBC $ 50
CVR Mini Starter, Pro torque Model $ 125
Mini Starter, Cracked mount but works $ 25
2 Carbon Fiber Beadlock 15x12 wheels, 4” BP. $ 80
Pro-Pan aluminum dry sump pan, has been repaired $ 125
Axles all gundrilled, 37” &34” for $ 60 total
Snap On 14.4 v impact, 3/8”. Charger broke, tool works just cant recharge so stopped using, still has some charge. rough looking but great tool. $ 40
SBC Wet Sump pan, dual kickouts, dipstick, windage tray, needs good cleaning. $ 100
2” Setback steel motor mounts (SBC) $ 5
6 blade 18” fan $ 10
Chrome 14” air cleaner assembly $ 5
3 new american racer tires, never raced, all MD 56 tires, 28.5-11.0-15R, 28.5-11.0-15DTW, and 29.0-11.0-15DTW $ 15 each.
32 gal ATL fuel cell with steel can $ 50.
I have pictures of everything, can get you measurements as needed. Call or text 417-860-4909 or message me. All prices do not include shipping and I will not ship anything that UPS will not take. Please no text or calls after 9pm central.