hubs with 4 bolt dust cover ???

[sirleafalot]

Hi got an older 9 inch with hubs that have 4 bolt dust covers...anyone seen this before and know what brand they might be ? I have only seen the 3 bolt dust covers thanks thanks

[Lizardracing]

If you cant find what you needed then any competent machine shop could drill/tap for the 3 bolt covers. or you could drill your own 3 bolt covers to 4 bolt.

[junebug]

I bet u have howe hubs they are pretty common and have a 4 bolt cover

[sirleafalot]

I bet u have howe hubs they are pretty common and have a 4 bolt cover thanks may have to send a pic to howe cause I tried ordering there hub cover and they were not correct when they arrived, or as mentioned may have to make some as a last resort

[hammond motorsports]

SCP ,Mittler, and others had 4 bolts can you post a photo?

[sirleafalot]

@ hammond great thanks wiil get pic and post

[hammond motorsports]

I will keep eye out of if you have facebook post on my page aswell . About all the hubs back in the late 80s up to mid 90s had 4 bolts .

[sirleafalot]

I will keep eye out of if you have facebook post on my page aswell . About all the hubs back in the late 80s up to mid 90s had 4 bolts . that would add up, got this ford 9 inch used and its old, sadly not dust caps on either side....wiill get you a pic thanks

[hammond motorsports]

I may still have new caps instock