View Full Version : hubs with 4 bolt dust cover ???
sirleafalot
10-15-2015, 03:14 PM
Hi got an older 9 inch with hubs that have 4 bolt dust covers...anyone seen this before and know what brand they might be ? I have only seen the 3 bolt dust covers thanks thanks
Lizardracing
10-15-2015, 04:39 PM
If you cant find what you needed then any competent machine shop could drill/tap for the 3 bolt covers. or you could drill your own 3 bolt covers to 4 bolt.
junebug
10-15-2015, 05:01 PM
I bet u have howe hubs they are pretty common and have a 4 bolt cover
sirleafalot
10-15-2015, 09:54 PM
I bet u have howe hubs they are pretty common and have a 4 bolt cover thanks may have to send a pic to howe cause I tried ordering there hub cover and they were not correct when they arrived, or as mentioned may have to make some as a last resort
hammond motorsports
10-16-2015, 11:03 AM
SCP ,Mittler, and others had 4 bolts can you post a photo?
sirleafalot
10-16-2015, 07:08 PM
@ hammond great thanks wiil get pic and post
hammond motorsports
10-17-2015, 08:51 AM
I will keep eye out of if you have facebook post on my page aswell . About all the hubs back in the late 80s up to mid 90s had 4 bolts .
sirleafalot
10-18-2015, 12:17 AM
I will keep eye out of if you have facebook post on my page aswell . About all the hubs back in the late 80s up to mid 90s had 4 bolts . that would add up, got this ford 9 inch used and its old, sadly not dust caps on either side....wiill get you a pic thanks
hammond motorsports
10-19-2015, 12:20 PM
I may still have new caps instock
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.