racinlm
01-18-2016, 11:25 PM
For sale 2013 PF Flyer 4-link minus engine, battery, and transmission. Includes lots of spares and everything that we have that is modified related.
Chassis has been updated to include B-mod suspension and can easily be converted to A or B mod, all components included to do either. You will get great support from Premier Fabrication. Chassis has been placed on jig to be sure all locations are correct and fresh powder coat. Approximately 13 nights on car and not raced in 2015. We will be racing a late model or we would keep this car and race it.
Roller was new in 2013.
This car is a duplicate to a car I raced which had 16 feature wins, 23 top 3's, 22 heat wins and built by us at the same time we built mine. Very little time on all components.
Comes with:
-Set of Afco Silver Series Base Valve shocks. New 2014
-Set of Afco 9 shock edge package for heavy and slick
-Afco Springs
-Afco Laydown shock - Also Integra hp gas laydown shock
-Light weight Bell Housing, and two Driveshafts.
529 lite weight rear end gear (new 2014) HRP 9" rear end & 543 rear end gear.
-Headers with mufflers
-Integra Pull biscuit/progressive spring pull bar
-Teardrop cell, fuel lines, main and return
-Seat Belts new 2014
-Kirky seat
-Radiator with rock guard
-MSD Ignition box, coil, and wiring
-Alum Steering Wheel
-Bearing Birdcages and clamp on brackets for B-Mod
-Brake Floater and clamp on bracket for B-mod
-Axles new in 2014
-(2) Beadlocks (6) non locks and whatever tires we have. Stamped and Non Stamped.
-Bumpers/nerf bars new
-Removable body
Spare front end components and everything we have for a modified.
Car is located in East Troy, Wi at Premier Fabricating and is being put together now. The car can be put together as an A-Mod or a B-Mod. Now would be a great time to get it built in either configuration. All same components on car as it was raced..
** This is a great opportunity to get yourself into a competitive car that will be put together in a race ready condition. Just add a transmission, engine, and battery and you are ready to race. You have my setup notes for an A-mod configuration and the expertise of premier fabrication for all setup help.
Complete setup available at time of purchase (open book)
Contact Chris 414-881-5512, texting is fine or private message
$8,250 or best offer. Make an offer and we can work something out.
Chassis has been updated to include B-mod suspension and can easily be converted to A or B mod, all components included to do either. You will get great support from Premier Fabrication. Chassis has been placed on jig to be sure all locations are correct and fresh powder coat. Approximately 13 nights on car and not raced in 2015. We will be racing a late model or we would keep this car and race it.
Roller was new in 2013.
This car is a duplicate to a car I raced which had 16 feature wins, 23 top 3's, 22 heat wins and built by us at the same time we built mine. Very little time on all components.
Comes with:
-Set of Afco Silver Series Base Valve shocks. New 2014
-Set of Afco 9 shock edge package for heavy and slick
-Afco Springs
-Afco Laydown shock - Also Integra hp gas laydown shock
-Light weight Bell Housing, and two Driveshafts.
529 lite weight rear end gear (new 2014) HRP 9" rear end & 543 rear end gear.
-Headers with mufflers
-Integra Pull biscuit/progressive spring pull bar
-Teardrop cell, fuel lines, main and return
-Seat Belts new 2014
-Kirky seat
-Radiator with rock guard
-MSD Ignition box, coil, and wiring
-Alum Steering Wheel
-Bearing Birdcages and clamp on brackets for B-Mod
-Brake Floater and clamp on bracket for B-mod
-Axles new in 2014
-(2) Beadlocks (6) non locks and whatever tires we have. Stamped and Non Stamped.
-Bumpers/nerf bars new
-Removable body
Spare front end components and everything we have for a modified.
Car is located in East Troy, Wi at Premier Fabricating and is being put together now. The car can be put together as an A-Mod or a B-Mod. Now would be a great time to get it built in either configuration. All same components on car as it was raced..
** This is a great opportunity to get yourself into a competitive car that will be put together in a race ready condition. Just add a transmission, engine, and battery and you are ready to race. You have my setup notes for an A-mod configuration and the expertise of premier fabrication for all setup help.
Complete setup available at time of purchase (open book)
Contact Chris 414-881-5512, texting is fine or private message
$8,250 or best offer. Make an offer and we can work something out.