2011 Victory w/ 2016 updates

[drive3b]

2011 Victory Chassis #437. Chassis was checked over and front suspension updated to 2016 by Victory in Dec. 2015.

New Outpace Upper A-frames
New QA1 upper ball joints and lower studs
New Centerlink, pittman arm, idler arm
New HMS tie rods
New IMCA stamped spindles from VIctory
New Afco rotors and bearing kits
PSC 6:1 steering box and power steering pump

Shocks by CPD
Quickcar guages OP, WT, FP
Quickcar remote recall tach
Quickcar brake bias guages
US Brake master cylinders
Wilwood pedals
Afco roller gas pedal

Quick Time Universal bellhousing
Fast Shafts driveshaft - new u joints
BSB J-bar and frame mount
TWM single side climbing pinion mount
Keyser birdcages
HMS 4 -bars w/ FK teflon lined rod ends
Solid top link (have a spring pullbar that would go with the car)

Bulldog 4.11 QC rear end (New in 2015)

Jaz 16 gal fuel cell
Optima red top battery

Roller minus engine,tranny,body
$8500 obo

Selling because we are getting out of racing

Located in Wilton, IA
563-506-0037

[ratbag12]

Please text me pics or call me please 616-250-2605 thanks




QUOTE=drive3b;1980448]2011 Victory Chassis #437. Chassis was checked over and front suspension updated to 2016 by Victory in Dec. 2015.

604 Crate with 40 nights. Ran on gas. Valve springs replaced after 20 nights
K-B Super Crate carb and spacer
New Radiator
MSD Billet distributor, 6AL ignition box, MSD coil
Moroso plug wires

New Outpace Upper A-frames
New QA1 upper ball joints and lower studs
New Centerlink, pittman arm, idler arm
New HMS tie rods
New IMCA stamped spindles from VIctory
New Afco rotors and bearing kits
PSC 6:1 steering box and power steering pump

Shocks by CPD
Quickcar guages OP, WT, FP
Quickcar remote recall tach
Quickcar brake bias guages
US Brake master cylinders
Wilwood pedals
Afco roller gas pedal

Quick Time Universal bellhousing
Brinn Transmission - 20 nights since rebuilt
Fast Shafts driveshaft - new u joints
BSB J-bar and frame mount
TWM single side climbing pinion mount
Keyser birdcages
HMS 4 -bars w/ FK teflon lined rod ends
Solid top link (have a spring pullbar that would go with the car)

Bulldog 4.11 QC rear end (New in 2015)

Jaz 16 gal fuel cell
Optima red top battery

Turnkey with new body/deck $12,000 obo
Turnkey w/o body/deck $11,000 obo

Roller minus engine & tranny $8500 obo

604 crate engine only - comes with distributor, plug wires, headers, starter, carb, carb spacer, fuel log w/ regulator, fuel pump, water pump, fan & pulleys, R2C air cleaner & base (alum top), flywheel, new set of valve springs. - $4000

Brinn Tranny - $1000 (will not sell until engine sells)

Located in Wilton, IA
563-506-0037[/QUOTE]

[drive3b]

Car currently does not have body/deck.