View Full Version : Thoughts on lift arm stuff
hunterracing
01-31-2016, 09:23 AM
What's everyone thoughts on lift arm like how much travel should be getting what spring for tacky or dry.. Or shock valving works best all around
MasterSbilt_Racer
01-31-2016, 09:39 AM
What's everyone thoughts on lift arm like how much travel should be getting what spring for tacky or dry.. Or shock valving works best all around
Be very careful relying on travel only. My experience is more late model stuff, but it isn't out of the question to stiffen spring and gain travel because the tires hooked better.
hunterracing
01-31-2016, 09:45 AM
But latemodels have twice tire to get better traction then mod with American racers so wouldn't need to spring it softer
MasterSbilt_Racer
01-31-2016, 09:47 AM
But latemodels have twice tire to get better traction then mod with American racers so wouldn't need to spring it softer
Yes. I didn't give you a number. The same result could happen for you going from say 150 to 175.
hunterracing
01-31-2016, 09:50 AM
That's softer then what I had and I was barely getting over 2 inches travel at 34 inches out
35smod
01-31-2016, 01:29 PM
I ran a 250 at 30" and would typically get 2-2.5" of travel with ump Hoosiers I typically like about a 5-6 on rebound and 3 on comp
hunterracing
01-31-2016, 01:42 PM
I had a 200 with American racers usra type barely getting 2inches I feel it should travel more to help aid some forward drives upper dry tracks
hunterracing
01-31-2016, 01:43 PM
935x integra steel shock
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.