PDA

View Full Version : Loose gruff



Purestock18
03-03-2016, 12:17 PM
Does anyone have any setup info on a 02 loose gruff swing arm mod

langdonracing48
03-04-2016, 04:37 AM
I could never get any setup info for mine, so I ended up basing my setup off of lightning's swing arm setup from the 01-03 range and tweaking it. I ended up with quite the oddball setup on my car, but it drove amazing. For springs I had a 800 lf, 900 RF, 350 LR, 375 RR. Had bilstien small body 4.5/4.5 shocks up front, started off with an afco 9/2 easy up left rear and a 4 right rear, then switched to bilstien nitrogen shocks by scottyrocket. Had 185# in the left rear, 80# in the right rear. Car was very left front heavy, over 250# front split. Only had 40# LR bite in the car, 48% cross, 53% left, 57% rear. Had nova lowers on it as well, that makes a huge difference in handling. The car is a forward bite machine. My swing arms are in the 3rd hole from bottom on the chassis. My top left bar is about 10* down hill, top right bar is level. 9* pinion angle.

Purestock18
03-05-2016, 06:44 AM
Ok thanks for the info