View Full Version : dry slick gearing question
Deish98
06-03-2016, 10:50 AM
I run a quick change if I run a 607 gear do I need to go up to 614 or down to 597 on dry slick just needing to know which way I need to go
Confused?
06-03-2016, 12:06 PM
Something you should try either way. I prefer a lower gear for dry. Some prefer a higher gear.
oldtrackchamp4x
06-03-2016, 06:58 PM
If you are good at easing off the throttle on corner entry, a lower gear might work for you, if not go higher. I would try both as Confused said. JMO.
mod88s
06-03-2016, 09:48 PM
More gear. When its dry, you are on the throttle less so you need the gear. And its easier to control wheel spin
I liked lower gear in my car, but my engine also liked to be lugged more than screaming rpm. Going from a 5.29 to 5.14 9" made a big difference for me. So there are a few variables, the beauty of the qc is you can dial it in better and faster.
Confused?
06-07-2016, 01:59 PM
A lower gear has a higher number. 5.29 is lower than a 5.14
Flyin Iowan
06-08-2016, 06:28 AM
i would change it to keep rpms the same.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.