dukesracin
08-09-2016, 06:25 PM
Car is fast but on the tight side with a little push from middle out if not driven hard
3 wheel wheelie from hell that I can't seem to get rid of - carries LF about 1' off the ground - I added a limit strap to LF and it is helping some but still wheelies
Track is a 1/5 mile med banked bullring with a ton of grip - no big cars only scale cars
Mod Lite - 1330lbs with driver - 72" wheelbase - 60" track width
3 link -24" LR at 5deg up - 24" RB at 11deg up - 12" Top link is solid at 20deg down and centered
12" Straight short bar 1 hole above pinion center at QC and 2.5" higher on Chassis at (20deg) down
Spring - LF - 200, RF- 180, LR- 175, RR- 160
Scale numbers - Left - 52%, Rear - 57%, Cross 48%- NO Bite, even up
I took all the bite out and moved RB up/LB down and it was better but still wheelies in grip on this bullring track
Out of ideas - do I need more RR spring? Chain down LR? Flatten out top link?
The wheelie is hard to drive in traffic and less than predictable to hit marks for lift points etc in traffic.
Thanks!
3 wheel wheelie from hell that I can't seem to get rid of - carries LF about 1' off the ground - I added a limit strap to LF and it is helping some but still wheelies
Track is a 1/5 mile med banked bullring with a ton of grip - no big cars only scale cars
Mod Lite - 1330lbs with driver - 72" wheelbase - 60" track width
3 link -24" LR at 5deg up - 24" RB at 11deg up - 12" Top link is solid at 20deg down and centered
12" Straight short bar 1 hole above pinion center at QC and 2.5" higher on Chassis at (20deg) down
Spring - LF - 200, RF- 180, LR- 175, RR- 160
Scale numbers - Left - 52%, Rear - 57%, Cross 48%- NO Bite, even up
I took all the bite out and moved RB up/LB down and it was better but still wheelies in grip on this bullring track
Out of ideas - do I need more RR spring? Chain down LR? Flatten out top link?
The wheelie is hard to drive in traffic and less than predictable to hit marks for lift points etc in traffic.
Thanks!