J.D. Laramee
10-13-2016, 12:45 PM
176ci 2881cc Mid height 8.5 Essl. block, Billet crank, Dyer 300m rods, JE Pistons, Stealth ti wrist pins, Arca head by Performance Porting Service, Ti valves retainer and locks. .686 Lift 257@ .050 on a 117 lob sep...This is the engine out of my street car that went 161.92mph in the quarter, engine is now set up turbo drag but could be changed to oval track without too much trouble. This engine would be EXTREMELY hard to beat....$11,500
185.5ci 3040cc Tall deck 9.0 Essl. block, Billet crank, Dyer 300m rods, JE Pistons, Stealth ti wrist pins, Arca head by Performance Porting Service, Ti valves retainer and locks. .686 Lift 257@ .050 on a 117 lob sep...This is the engine out of my Race car that went 164.76mph in the quarter, engine is now set up turbo drag but could be changed to oval track without too much trouble. Same with this engine, would be EXTEREMELY hard to beat....$13,500
https://www.facebook.com/StingerPerformance/photos/a.163566940366169.35791.110243915698472/1220435764679276/?type=3&hc_location=ufi
https://www.facebook.com/photo.php?fbid=10205508029538980&set=p.10205508029538980&type=3&hc_location=ufi
Any questions call me Joe Laramee @ 217-412-4056
185.5ci 3040cc Tall deck 9.0 Essl. block, Billet crank, Dyer 300m rods, JE Pistons, Stealth ti wrist pins, Arca head by Performance Porting Service, Ti valves retainer and locks. .686 Lift 257@ .050 on a 117 lob sep...This is the engine out of my Race car that went 164.76mph in the quarter, engine is now set up turbo drag but could be changed to oval track without too much trouble. Same with this engine, would be EXTEREMELY hard to beat....$13,500
https://www.facebook.com/StingerPerformance/photos/a.163566940366169.35791.110243915698472/1220435764679276/?type=3&hc_location=ufi
https://www.facebook.com/photo.php?fbid=10205508029538980&set=p.10205508029538980&type=3&hc_location=ufi
Any questions call me Joe Laramee @ 217-412-4056