View Full Version : Crate Header
greenmod
02-23-2017, 08:40 PM
What's the best header for a 602 crate engine?
brad hibbard
02-24-2017, 11:18 PM
there is no "best"
headers are a give and take
1 design will take from one end of the power band and give to the other
another design will do the opposite
the trick is to add to one side and not "take" as much from the other
1st order of business is the flange ---CORRECT header flange
make sure your header flange is NOT covering any of the exhaust port and also make sure that it is not so big that it may lose a seal when put into use
stay basic at first
Brad
www.race-1.com
dirt0
08-28-2017, 07:14 AM
Are the 602 ports the same as the 604 ports
MLR19
08-29-2017, 03:32 PM
Pretty sure the 602 takes a std SBC header flange, the 604 flange has bolts offset from std.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.