View Full Version : Arm location
LIS20
03-09-2017, 12:11 AM
I have a rocket with the black front end - the set-up book calls for +5* camber on the left side - the a-arm cross shaft is located on the inside of the up-rights and i can only get about +2* of camber - should the cross shaft be mounted on the outside of the up-rights - nothing is bent - the chassis has been re-jigged at rocket and the ball joints and spindle have been checked - any help would be appreciated - thanks in advance
7uptruckracer
03-09-2017, 07:08 AM
Just worked on one. They ended up changing to the bent uprights i'm going to assume you have the straight uprights which is where the problem lies. Its probably about a 2003 I'm guessing?
MBR Performance
03-09-2017, 11:12 AM
Just shorten the lower control arm. If you are using the heim style.
CCHIEF
03-14-2017, 06:13 PM
This or use a 1/2" longer upper than called for.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.