View Full Version : Leaking bert trans
Younggun32
05-10-2017, 07:36 PM
My bert is leaking towards the front and coming out of the bell housing. I took it out and put a new front seal in and re-sealed everything and put it back in and it still leaking after that. Where could it be coming from? I dont see anything obvious.
Racermb
05-10-2017, 09:33 PM
It's leaking where the lower shaft goes in the case
z40chief
05-11-2017, 01:09 PM
There is a o-ring on the lower shaft that goes thru the case and clutch assembly. Look at a picture of a bert disassembled and you will see it.
rakracing
05-11-2017, 07:57 PM
mine always leaked when removed and reinstalled, dig out the old silicone, clean with 2+2, over fill area with new silicone and install while wet, all better tomorrow .
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.