View Full Version : gears 4 gateway
brewster baker
09-16-2017, 08:09 AM
gears 4 late model and modified at gateway dirt
Punisher88
09-16-2017, 08:20 PM
I was on a 7.12 with a 358 flat tappet nlms motor with spec brodix aluminum 23* heads. Turned 85-8700.
dirtracerl77
09-19-2017, 12:28 PM
I ran a 6.86 in a mod. I had a good full roller 355, turned it 8200
a25rjr
09-19-2017, 01:15 PM
gears 4 late model and modified at gateway dirt
I thought your Six Pack crew "acquired" whatever parts you needed! :)
Krooser
09-19-2017, 01:51 PM
I wanna know Lonnie Anderson's bra size..
brewster baker
09-19-2017, 08:28 PM
thanks 4 the answers it is hard to acquire parts with all them in closed trailers
hucktyson
09-21-2017, 06:13 AM
The flat tappet turning 8700 sounds like a great idea. I know the cup guys used to use the cams with the hard face overlay welded in and some super expensive lifters to pull that off. Do 23 degree heads even make power at 8700 ??
Punisher88
09-21-2017, 06:56 AM
It was only a split second I figured. I wanted it to launch off the corners so I hung a gear in it.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.