Ltemodel
02-02-2018, 03:30 PM
I have a Winters 4.11 rear end center section with the shortened case. This is not suited for open motors but will work great for crate or spec motor racing.
It is completely disassembled except for the lower shaft is installed in the center.
I'm trying to get:
$500 for the center section with the parts to put it together.
$500 for the polished ring and pinion. (Brand new)
$130 for the spool.
We wrecked the original ring and pinion and just never reassembled it.
I have no tubes or side bells for the rear end.
All bearings are new.
You can see pictures at http://hogantechnologis.com/racing-parts-sale/
I can be reached at 262-510-6246 or 262-446-9747.
email to kevin@hogantechnologies.com
Please see pictures before you purchase. They can all be blown up for closer inspection.
It is completely disassembled except for the lower shaft is installed in the center.
I'm trying to get:
$500 for the center section with the parts to put it together.
$500 for the polished ring and pinion. (Brand new)
$130 for the spool.
We wrecked the original ring and pinion and just never reassembled it.
I have no tubes or side bells for the rear end.
All bearings are new.
You can see pictures at http://hogantechnologis.com/racing-parts-sale/
I can be reached at 262-510-6246 or 262-446-9747.
email to kevin@hogantechnologies.com
Please see pictures before you purchase. They can all be blown up for closer inspection.