daytonagary
02-17-2018, 09:18 PM
355 Small Block Chevy $3900 SALE SALE SALE
over $5000 invested in just parts plus labor to assemble, over $6000 to duplicate another one for you like this
all new parts except heads and intake have 1000 street driven miles on them
Gary Gross Racing team open wheel modified #117
010 block 4 bolt .030 over fresh bore and hone
Eagle Forged 4340 crank race balanced
Scat Forged I-Beam rods with 7/16" cap screws
Icon Forged pistons 12 to 1 compression
File fit moly rings
Clevite H series race bearings
Chevy 292 high performance steel heads 2.02 intake 1.6 exhaust 1.55 springs, race retainers, fully race ported
Solid lift cam 537/557 lift 105LC
Solid lifters with direct lube hole
Double roller timing chain with needle thrust bearing
Chrome moly pushrods one piece
ARP Head Bolts
Fel-Pro hi performance head gaskets
Victor Jr. Edelbrock intake manifold
Roller rocker arms with stud girdle
Oval track racing oil pan
New Melling select oil pump and pickup
I built this engine last season as a spare engine for dirt modified race car and luckily never needed it.
Am building a new engine for car this year and will use last years race engine as spare so don't need this one.
Needs carburetor, water pump, distributor, spark plugs, plug wires to complete
I will finish assemble and do initial run in on my engine run stand if purchaser brings me the parts to complete it.
over $5000 invested in just parts plus labor to assemble, over $6000 to duplicate another one for you like this
all new parts except heads and intake have 1000 street driven miles on them
Gary Gross Racing team open wheel modified #117
010 block 4 bolt .030 over fresh bore and hone
Eagle Forged 4340 crank race balanced
Scat Forged I-Beam rods with 7/16" cap screws
Icon Forged pistons 12 to 1 compression
File fit moly rings
Clevite H series race bearings
Chevy 292 high performance steel heads 2.02 intake 1.6 exhaust 1.55 springs, race retainers, fully race ported
Solid lift cam 537/557 lift 105LC
Solid lifters with direct lube hole
Double roller timing chain with needle thrust bearing
Chrome moly pushrods one piece
ARP Head Bolts
Fel-Pro hi performance head gaskets
Victor Jr. Edelbrock intake manifold
Roller rocker arms with stud girdle
Oval track racing oil pan
New Melling select oil pump and pickup
I built this engine last season as a spare engine for dirt modified race car and luckily never needed it.
Am building a new engine for car this year and will use last years race engine as spare so don't need this one.
Needs carburetor, water pump, distributor, spark plugs, plug wires to complete
I will finish assemble and do initial run in on my engine run stand if purchaser brings me the parts to complete it.