4m.net - The Most Opinionated Racing Message Board In The Universe
>
Racing Tech
>
Dirt Late Models
> Question for the engine guys.
PDA
View Full Version :
Question for the engine guys.
bullittwrench
03-14-2018, 05:44 PM
With a 4 stage pump, should I pull all 3 scavenge from the pan or 2 from the pan and 1 from a valve cover? It’s a 355 all steel flat tappet. Thanks
perfconn
03-14-2018, 06:51 PM
All from pan if you have no valley scavenge.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.