Complete UMP modified sell out

[ABAtester]

$22,000

2008 Rocket by Ruhlman which has the latest small metric front end package and has never been clipped. Car comes with 430 Dargie engine, KB carb, and Beyea headers. 715 laps since freshened and has new crank, rods, pistons, and cam shaft since that last rebuild. Car comes with all spare engine and chassis parts, shocks, rims, tires, and tools you’d need to go racing.

Car has multiple feature wins and a track championship.

[ABAtester]

Price reduced to $20,000 for this turnkey car and full operation

-Motor has 23 deg AllPro heads, Dart intake and block, Compstar rods and crankshaft, JE Pistons, KB alcohol carb and spacer. Produced 750 HP on dyno running gas.
-Beyea headers and mufflers currently installed; spare Schoenfeld headers
-complete spare ignition system
-several K&N and Wix air filters
-2.5 sheets of aluminum
-14 Bilstein shocks and 23 springs
-array of COT bump stops
-13 rims w/ 3 new and 9 used tires
-spare metric subframe and sets of stock steering boxes and spindles
-10 rear end gears for quick change with totes
-scales, toe bar, caster/camber tools
-spare hubs, rods, links, bearings, pads, etc
-3 starters w/ 16V battery and charger
-car has 22 gallon cell and extra 32 gallon cell alao included
-Bert bellhousing and transmission with belt drive fuel and power steering
-Winters magnesium low drag rear end with gun drilled axles
-halon FireBottle system installed

PM for further details

[ABAtester]

Price reduced to $19,000. PM for details.

[ABAtester]

Price reduced again to $16,000. Scales have sold, a couple rear end gears have sold, one of two sets of shocks have sold. Still a complete race car with spares and lots of rims and tires to get you on the track. PM for details.

[usafracer]

What do you have left for shocks?

[ABAtester]

PM sent regarding shock inventory

[ABAtester]

I’m willing to separate the car as a roller and the associated spare parts from the chassis. Asking $5,000 for the roller and all the spare parts, rims, tires, etc. Asking $11,000 for the Dargie motor, Beyea headers, Bert aluminum bellhousing and aluminum transmission, pumps, KB carburetor, etc and associated spare parts. PM if interested.

[ABAtester]

Motivated to sell; willing to entertain alternate offers. Pm if interested.

[ABAtester]

Reducing asking price for the entire turnkey operation to $15,000. Asking $4000 for the chassis as a roller with all the spare parts. Still asking $11,000 for the entire power train package. PM if interested.

[zdr01]

I sent you a pm

[ABAtester]

Still available and willing to deal.

Asking $14,500 for turnkey operation.

$4,000 for roller with shocks and associated spare parts, springs, rims, and tires.

$10,500 for power train including the engine, carb, Bert bellhousing, Bert transmission, and belt driven pumps.

PM for details.

[fitz18]

where is car located and can you send pics to fitz-18@hotmail.com

[ABAtester]

Car is sold. The Dargie 434 engine, KB alky carburetor and spacer, Beyea tri-y spread port headers, case of amsoil, extra spark plugs, and air cleaners remain available. Asking $10,000. PM for details.

[mod21cook]

Is this still available

[ABAtester]

Yes it is still available

[ABAtester]

The motor, carb, oil, spark plugs, air cleaners, and headers need a new home. Need an offer.