View Full Version : 2015 Black diamond ball joint
tornadochaser7
06-29-2019, 06:04 PM
Could someone tell me the Howe ball joint number for a 2015 Black diamond right front lower?
Thanks much
Krooser
07-01-2019, 08:31 AM
Do they use a screw in or uniball?
tornadochaser7
07-01-2019, 10:22 AM
They use a screw in
billetbirdcage
07-01-2019, 03:23 PM
They use a screw in
Should be 22430, which is a screw in with the Chevy taper on stud. I don't know if they use a longer or shorter Chevy pin or not but that is the std length one.
Add an S on the end if you want a steel cap over the std aluminum one.
To change pin length:
-.3" 2243103
-.2" 2243102
-.1" 2243101
0 22430
+.1" 22431
+.2" 22432
+.3" 22433
+.4" 22434
+.5" 22435
+1.0" 224310
https://i.imgur.com/YhiVZcZ.jpg
ric78
07-01-2019, 07:55 PM
Our 17 uses a 1/2 longer lower ball joint on the rf. I would just call BD to confirm they will tell you.
CCHIEF
07-05-2019, 01:22 AM
A 17 has different spindles than a 15 IIRC...(correct?), agree, call BD.
A ron
08-18-2019, 09:31 PM
Did Stucky give you a part number?
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.