Krooser
07-14-2019, 09:03 PM
Super late...650 HP...LM30 tire. 1310 or 1330 u-joint?
Also I'm piecing together a QC with a magnesium Frankland center section and Winters 8 rib aluminum bells. I have both a steel and an aluminum spool. I'm leaning towards the steel spool. Needs a driveshaft flange.
I also have a Winters Sprint mag QC in my old wide combo chassis. If I use this I'd need to change the tubes since this deal has 32/37 axles.
I have a few driveshafts... I figure I'd just buy a flange that matches the driveshafts.
Going in my Smackdown chassis.
Anyone see any issues?
Also I'm piecing together a QC with a magnesium Frankland center section and Winters 8 rib aluminum bells. I have both a steel and an aluminum spool. I'm leaning towards the steel spool. Needs a driveshaft flange.
I also have a Winters Sprint mag QC in my old wide combo chassis. If I use this I'd need to change the tubes since this deal has 32/37 axles.
I have a few driveshafts... I figure I'd just buy a flange that matches the driveshafts.
Going in my Smackdown chassis.
Anyone see any issues?