View Full Version : Left lower adjustment
TwistedFrame21
07-20-2019, 11:41 PM
When moving the left lower down on the cage to say 5 1/2 from 4 1/2, should you reset your droop load? I made that adjustment tonight and rest it and I couldn’t tell much of a difference
MasterSbilt_Racer
07-21-2019, 06:00 AM
Did you maintain your install pin to pin load?
TwistedFrame21
07-21-2019, 12:53 PM
I am running a single 100lb spring, static load was the same until I adjusted the droop load which in turn would have altered the static load
MasterSbilt_Racer
07-21-2019, 01:28 PM
I am running a single 100lb spring, static load was the same until I adjusted the droop load which in turn would have altered the static load
Ok. That is what I was assuming. Loss of static load is going to be an opposite adjustment compared to the bar change.
Powered by vBulletin® Version 4.2.0 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.