PDA

View Full Version : pierce vic hill engine?



crownman25
02-20-2021, 02:03 PM
I WAS WATCHING on ppv. the vic hill engine that they took out when the belt broke was a sb2 ? Does anyone know?

MasterSbilt_Racer
02-20-2021, 05:46 PM
I WAS WATCHING on ppv. the vic hill engine that they took out when the belt broke was a sb2 ? Does anyone know?

I assumed it was a R03. Didn't pay much attention. Bobby may be running older stuff with engine sponsor gone?

MasterSbilt_Racer
02-20-2021, 06:45 PM
Put a fork in it! bobby will be lucky to make it through the season with all his handling and engine woes...

Did you watch that in-car from East Bay? That was the worst I've ever seen.

Mod Runner
02-20-2021, 11:58 PM
Vic Hill engine ? I thought Pierce was suppose to be running Mullins LS engines.

NeedforLM$peed
02-21-2021, 12:10 AM
He thought he was going to throttle mash all the way around that place for 30 laps. Nope.

zooker25
02-21-2021, 08:54 AM
Bobby finally qualified better with the Vic Hill engines! That was always a issue last year.

Highside Hustler25
02-21-2021, 09:36 AM
If Pierce is loyal to any engine builder, I'd say it's probably Bill @ Pro Power. Been running them forever.

MasterSbilt_Racer
02-21-2021, 09:40 AM
If Pierce is loyal to any engine builder, I'd say it's probably Bill @ Pro Power. Been running them forever.

I think Hoker is tight with Pro Power.

Highside Hustler25
02-21-2021, 11:33 AM
Pierce was using Pro Power long before Jeff jumped on board.

Billy_the_kid
02-21-2021, 01:52 PM
Pierce was using Pro Power long before Jeff jumped on board.Pierce started out with propower. he did leave for a minute and tried Jay D!ckens but that was short lived. then back to propower. that was back a few years

Dlmfan123
02-21-2021, 03:52 PM
I think Hoker is tight with Pro Power.Last year pierce was running his Durham motor. When viper came on board a couple years ago he was supplying 2 pro powers

Krooser
02-21-2021, 07:56 PM
He has a Durham Ford for sale on FB Marketplace for $26k.

Jking24
02-21-2021, 08:03 PM
I WAS WATCHING on ppv. the vic hill engine that they took out when the belt broke was a sb2 ? Does anyone know?I'm not sure but i think alot of vics engines use the sb2 style bolt pattern on the valve covers.

Josh Bayko
02-21-2021, 08:13 PM
He’ll be out if motors before the season even really gets going.

fastford
02-22-2021, 09:46 AM
He has a Durham Ford for sale on FB Marketplace for $26k.

maybe he should put it in the car , others are running well with them , or maybe he is skeered ....lol.....

MotoMatt
02-23-2021, 09:57 AM
Did you watch that in-car from East Bay? That was the worst I've ever seen.


Which night was that on, I'd like to see it.

crownman25
02-28-2021, 07:12 PM
i researched its like a sb2 engine but greatly improved the ro engines probb same as older carb cup engine say ro 7 big bore but aluminum block...

crownman25
02-28-2021, 07:13 PM
article said that vic hill bought all the ro cup heads that he could get...

crownman25
02-28-2021, 07:15 PM
i bet that vic hill ross bailes had is one of them... lots of speed down straights....

Mod Runner
02-28-2021, 11:50 PM
Pardon my ignorance , but what is an ro cup head ?

NeedforLM$peed
03-01-2021, 12:04 AM
Pardon my ignorance , but what is an ro cup head ?

Roush OR Roush/Yates Nascar engine heads.

dirtcrazy4u
03-01-2021, 05:00 AM
Roush heads on a bowtie, say it isn't so.

Jking24
03-01-2021, 07:17 AM
Pardon my ignorance , but what is an ro cup head ?Has nothing to do with roush or yates as stated above. The ro is what the gm cup engines are called example ro7,ro8 its just gms designation for a particular design

ZERO25
03-02-2021, 09:21 PM
i see where Angie has put up 5 motors for sale on FB!

Krooser
03-03-2021, 10:33 PM
He has a Durham Ford for sale on FB Marketplace for $26k.
Pierce now has five engines for sale at $20k each

BloomerWon
03-04-2021, 10:30 AM
Oh yeah! I'm gonna go right out and buy an engine that bobby ran!! Lol some dam more why don't ya?. .... .. . ..... 😆

BloomerWon
03-04-2021, 10:33 AM
i see where Angie has put up 5 motors for sale on FB!

She drunk again mybe?? Bob know about this???

MasterSbilt_Racer
03-04-2021, 10:37 AM
Oh yeah! I'm gonna go right out and buy an engine that bobby ran!! Lol some dam more why don't ya?. .... .. . ..... 

It's like advertising a car for sale and saying former Don O'neal car.

Barbecueboy
03-04-2021, 10:38 AM
i see where Angie has put up 5 motors for sale on FB!

Any of them look like they might have been set on fire?

BloomerWon
03-04-2021, 10:40 AM
It's like advertising a car for sale and saying former Don O'neal car.

Ahhh😂hahahahahaha!!!! Yeah it is^^^^

BloomerWon
03-04-2021, 10:49 AM
Any of them look like they might have been set on fire?

Fire in the hole!!

https://youtu.be/YfaW3UY3wZ0

Josh Bayko
03-04-2021, 11:01 AM
I wonder if any of those motors are “not broken” the way the rockets they had were “never bent” when they advertised them?

crownman25
03-04-2021, 03:23 PM
hey the way that vic hill engine ran down in fl I (not a nice word)(not a nice word)(not a nice word)(not a nice word) SURE WOULD SELL EVERY MOTOR I HAD AND ORDER 5 MORE FROM VIC......

Krooser
03-08-2021, 11:19 PM
FB ad sez "all fresh"....

Sez Durham, Propower and Custom...

"Selling off 5 Dirt Latemodel motors! Must sell! We will entertain serious offers. These are all Bobby Pierce engines and are fresh and great motors. Call for details! 217-304-2807"

Krooser
03-12-2021, 06:38 PM
His FB profile now sez Vic Hill engines...

LeafMaster41
03-13-2021, 06:48 AM
Did you watch that in-car from East Bay? That was the worst I've ever seen.

Worst pushing car I'd ever seen. Maybe they'll get it figured out, I'm not a fan but it sucks to struggle and still be trying so hard.

chupp n bloomer fan
03-13-2021, 07:11 AM
Oh yeah! I'm gonna go right out and buy an engine that bobby ran!! Lol some dam more why don't ya?. .... .. . ..... 


Any of them look like they might have been set on fire?


It's like advertising a car for sale and saying former Don O'neal car.


Someone in the bobby bunch really need to start hiding the JD and bic lighters!! Seriously!!! Smh


She drunk again mybe?? Bob know about this???Jesus, you guys, lmao.

I wouldn’t touch any of the motors for sure. Car, if all the panels were off, and I had Mark Richards, or someone who had fixed a lot of Rockets look at it, maybe.

BloomerWon
03-13-2021, 09:08 AM
Lmao!!!! 😆

HIGH ROLLER
03-13-2021, 04:27 PM
🤣🤣🤣🤣🤣🤣🤣🤣🤣🤭🤭🤭🤭🤭🤭

Senroc-Systems
03-13-2021, 10:19 PM
The engine he had in tonight at Florence is indeed a SB2 by Vic Hill....