Guys I need some help after being out of racing for 18 years im starting over in a bmod. have only ran 3 times so far. first night car pushed bad entering which made me loose off. made some changes and cars was a little better. 3rd night made a lot of changes and car was super loose. but scales say its closer to what it should be. DW8, solid pull bar 16" rear springs, lr in frt, rr behind, both rear bars are at 16", lr bar 3hole up, rr bottom or level. here are weights. 1st night springs lf 625 rf 525 lr 200 rr 150 weights lf 443 rf 585 lr 700 rr 510 left side 51.2% rear 54% cross 57% total 2237 2nd race changed rr spring to 175,added 25 lbs to front left frame rail lf 524 rf 531 lr 647 rr 566 rear 53% cross 51.9% 3rd race same springs added 60pounds to rear over axle lf 531 rf 497 lr 699 rr 639 rear 56.6% cross 50.5 ideas? one more thing. first two race ran 1" front stagger and 2" rear. 3rd race only 1" rear.