Im building an IMCA Legal Stock car and you can run an aftermarket floor pan. What Im wondering is it easier to buy one or build one. If building one is cheaper some ideas on how to build it would be great. Thank you for any help.
Printable View
Im building an IMCA Legal Stock car and you can run an aftermarket floor pan. What Im wondering is it easier to buy one or build one. If building one is cheaper some ideas on how to build it would be great. Thank you for any help.
unless you have experience and a brake, its going to be mush easier for you to just buy one and install it.
I have access to a 8ft brake and have built a few aluminum bodies and have family memeber thats built car bodies(steel and aluminum) for years.
shoule be fairly easy. i'd build it in 2 pieces a front 1/2 and a back 1/2. make the driveshaft tunnel square..nice place to mount your shifter. make the trans tunnel start square and widen out towards the front. leave enough room for the drivers feet!