needing new pads,any stock type comparable with the performancce type? is there a big difference? 3/8 semi banked,tacky-semi slick. just needing some input??? Thanks
Printable View
needing new pads,any stock type comparable with the performancce type? is there a big difference? 3/8 semi banked,tacky-semi slick. just needing some input??? Thanks
I needed some and couldn't get any sent to me before a race so I got a set of the napa ceramic pads cost me $90 went through the break in process and they were no good no stopping power when I came in from the main rotors were glowing. I have had good luck with the hawk blacks they are worth the money. I run on a big 1/4 with a lot of bank and sweeping corners.
I'll 2nd the Hawk Blacks
Same here. Hawk blacks, just not in the rf
Hawk DTC-30 in rear and DTC-05 in the fronts best results used with new rotors!!
The blacks will kill the rotors. I use the DTC 30's.
All you guy's running LR brake floaters? Do you do anything different with pad setup running brake floater vs non brake floater?
Always ran Wilwood Polymatrix "C" or "D". No rotor wear but have great brakes.
SPark
Have used both blackhawk and wilwoods, both stop very well. Hawks are a little harder on the rotors.But that is a small price to pay for the stopping power.