Moving jbar from outside the frame rail to the inside and keeping the same side to side measurements. What to expect? Going to test tonight and that's one of the things I was going to try. Thanks in advance
Printable View
Moving jbar from outside the frame rail to the inside and keeping the same side to side measurements. What to expect? Going to test tonight and that's one of the things I was going to try. Thanks in advance
Basically, things will just happen quicker as far as hike up and roll. The rear will move farther left during roll as well. That should tighten the car a bit.
a little more free in, tighter middle, offQuote:
Originally Posted by dirtslinger4
start off with a little less angle (just a little, one hole down on the frame maybe)