Warning: Don't buy any heads from dan32
We purchased what we thought was a new head that had a used cam in it. We were told that the cam would be degreed in and ready to bolt on the motor and go. (That was not the case at all). He told us on the phone how we should degree the cam in and did exactly like he told us. In turn it lead to detonation that melted our spark plug and burnt one of our valves. We removed the head to repair the valve. Looking at all the valves none of them looked like they were lapped in or a valve job was done. I decided I was going to take it apart and relap all the valves. With doing that I pulled the cam out and the cam bearings really wore out bad to the point that there was grooves in them. Only has 23 laps on the head from what is suppose to be brand new. Contacted Dan and told him what I found and he said it was cause cam was setup wrong and that I took new parts out and put old parts in. Said I ruined the head and he don't want to give money back for a ruined head that was wore out to start with. He sold us a wore out head that he claimed was a awesome head and told us to get it fixed and just go racing. Talked to a real engine builder and was told that timing will not wear grooves in cam bearings in 23 laps. Said he guarantees it to be good and if not will give money back and now that we took it apart and saw what it really is he says we did it and no money back. 1500 dollar scam and now has a excuse for everything wrong with it. Have pics to prove head. VERY UNSATISFIED CUSTOMER DON'T DEAL WITH HIM