Printable View
Got a .390/.410 Howard cam part#112701-06 with a set of rhoads lifters.
Cam and lifters have 2 races on them, was broken properly with a set of soft springs and break-in lube before having everything swapped over to race prep.
200 shipped, put in and run. the hard part has already been done
Howard specs:
Cam Style Hydraulic flat tappet
Basic Operating RPM Range 3,000-6,200
Intake Duration at 050 inch Lift 227
Exhaust Duration at 050 inch Lift 235
Duration at 050 inch Lift 227 int./235 exh.
Advertised Intake Duration 280
Advertised Exhaust Duration 288
Advertised Duration 280 int./288 exh.
Intake Valve Lift with Factory Rocker Arm Ratio 0.390 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio 0.410 in.
Valve Lift with Factory Rocker Arm Ratio 0.390 int./0.410 exh.
Lobe Separation (degrees) 106
Camshaft Gear Attachment 3-bolt
Computer-Controlled Compatible No
Valve Springs Required Yes
Camshaft Manufacturers Description Stock lift rule. Best on quarter to 3/8-mile tracks. Strong lower midrange power.
Quantity Sold individually.
took it to ebay