What Final Ratio do the factory stocks run at highland, IL? 1/4 mile clay.
Printable View
What Final Ratio do the factory stocks run at highland, IL? 1/4 mile clay.
For the last few years its been around the bottom every nite, so a 733/766 would be good. When it used to be around the top, a 700 worked well. That will put ya at about 6500 or there abouts.They put new dirt on it this year, so hopefull the top will work for the slower classes.In 12, if you started on the front row pole, you were almost guarenteed a win, same as heats.
Thanks for your help. I am hoping the track work makes it a better racing surface.
Almost every race any of my cars have won there wether it be street stock or sportsman(and it's been alot of them) has been with 7.00 gears... tried 7.33s and they were ok if you couldn't keep your corner speed up.
Extreme is right ,them Brian Worley chassis cars also won at every track with different drivers this year Jason in the 66 car drove through the middle and won there while everybody is bottom feedin , with his granite 600 gear!
Worley should just sell his spring/shock/tire/wheel package. That's what works .The 66 ran pretty good week in and week out.Wasnt as good as the 6 of hewit, but he did run well.Quote:
Originally Posted by special
His brother Brian builds them cars and motors and he will sell that info, Jason beat the 6 at highland but the6 didn't even come close at granite, jake said its just a really fast place , they both had good seasons and it was was Jason's first full season, hopefully his work will allow him to race more in 2013 Brian's info is 573 883 6768 and he goes by Qwikrnu on stl racing if you need chassis info!
Yea. Would be good to see the 66 at a few more tracks. Should be a good year in 13.Thanks for the info.Quote:
Originally Posted by special