Originally Posted by
Bdcase19
If you put a 200 lb spring and a 225lb spring in a spring dyno and compress them both to 1 inch the numbers are going to be the same? I think not! Even 2 inches one will be 400lbs and one will be 450lbs. Just like if I was to replace my rf 1100lb spring to 1200lb spring and set the ride height back to 7 1/2 inches the wheel weight will not be the same and neither will any other numbers. If that was the case why would people need to scale their cars they could just set ride heights and every number would be the exact same. As far as cross and bite they are not the same there is only one wheel weight that has anything to do with both. Cross will help turn the car. Bite tightens the car up. It's obvious.