Printable View
Can anyone please help me and tell me what the ride heights should be for the Black Front End Rocket and also where they should be measured from both front and rear. I bought this car used and did not get a setup book for it so I do not know where to start. Any information would be appreciated. Thank you in advance.
I don't have my book handy, but give rocket a call and ask them to send you a book. It's a very handy tool to have.
LF=3-7/8" RF=3-5/8" with double box engine crossmember or 4-1/8" w/ round tube engine crossmember. The fronts are measured vertically from the lower control arm up to the frame. I usually make up a piece of 1/2" PVC cut to each measurement and clearly marked so you can just push it in without having to try and read a tape.
RR depends on the birdcage. 6-1/8" with the original welded TWM/Rocket, 6-7/8" with 1" billet Rocket, or 6-3/4" with latest billet TWM/Rocket. No measurement for LR. There is a rounded bulge on top of the birdcage. Measure from it straight up to the underside of the framerail.
If you need a setup book, Rocket will send you one for free if you call and give them the serial number.