I have a 05 grt I am putting together. Anyone have a length for the j-bar. Will it depend on which frame mount used. Is there a measurement off frame to rear end to use then set j-bar length. I haven't tried contacting grt.
Printable View
I have a 05 grt I am putting together. Anyone have a length for the j-bar. Will it depend on which frame mount used. Is there a measurement off frame to rear end to use then set j-bar length. I haven't tried contacting grt.
GRT's website says 19 1/4.
measure from center of drive shaft to inside edge of 2x2 for jbar mount should be 161/4 per grt ran mine at 16, jbar actually measured around 20 1/4