Will a stock GM aluminum bell housing be ok for a crate car. I think it would be as good as the bert or brinn. Most of those have been cracked and repaired.
Printable View
Will a stock GM aluminum bell housing be ok for a crate car. I think it would be as good as the bert or brinn. Most of those have been cracked and repaired.
Yep, we ran one in a limited car a few years ago.....no problems!
I've used them up to 600 hp. If you have an adapter ring machined to adapt the GM truck bellhousing down, even stronger.Quote:
Originally Posted by ace1
I think that is the one I have. The hole is about 5 1/8". But I don't have an adapter.Quote:
Originally Posted by MasterSbilt_Racer
I wouldn't run it with no pilot like that.Quote:
Originally Posted by ace1
Oh no, I'm not. I found a crack in it around the starter cup any way. I'll keep my steel bell in for now. Thanks
drill a hole at the end of the crack to stop it.
then die grind down the center of the crack on both sides, and have a good aluminum welder weld it.