Originally Posted by
JR. MECHANIC
LR half leaf clamped to the axle.... RR floated....
Mount the j-bar how you see most today.... LS Of frame to RS OF PINION
On the front of the leafs, cut the part off that holes the bushing and make a bracket that will bolt on the the leaf to accept a rod end. On the Brackett on the chassis, make it about 4-5" wide and allow the rod ends to slide on the bolt..... for when the rear end moves laterally. Start with LR eye about 3" above center of axle. Rr about level with axle. Keep lowering blocks to a minimum