Printable View
Our guru, at the last minute, wanted to change our short top rod (bg Rocket), to the standard one which we didnt have. He went and borrowed one from a team that runs xr1's. After about 30 mins of thrashing, we pulled it back out and realized the spacers were 7/16" id. It was brand new and still in its packaging. Is this standard for an xr1?
If i understand correctly your talking about the spacers for the four bar. They are 1/2" typically
If i understand correctly your talking about the spacers for the four bar. They are 1/2" typically. the spacers for the steering rack eyes are the only thing that are 7/16" normally
Yep, i guess Rocket sent the wrong spacers as they were still wrapped up in their packaging installed on the new trailing arm!Quote:
Originally Posted by Jking24
Sounds like you ended up with a lf tie rod assembly
You may be right.....the tube was a tad too short!
I think blue grey stuff was 16-3/4 short and 18 long lt bar . Lf tie rod usually falls in the 17-1/2 range of i if i remember correctly
Correct.......but both of the heims were 1/2". I think Rocket just sent the wrong spacers.Quote:
Originally Posted by Jking24