Originally Posted by
Egoracing
If you look at the 7th pick down the RR top arm is on the rear end. I was looking at the grease fitting on the LR birdcage, I see what you are saying about no top link mount. In the 9th pick it looks like they cut the top mount off of the birdcage, you can see where it was ground on. Also you can see in several of the pics that the rear end housing is clean where the birdcages look like they were rotating. I am not sure how it would work as a 2 link if the LR is not welded to the rear.
Lightning chassis did the long panhard bar like that on asphalt but it would be wrong for asphalt is what I ment to say, not that it is wrong for dirt.
Will the LR mount rotate on the housing when you jack it up or is it welded solid?