What brand, type, weight and diameter are you using on different built SBC engines? Also how did you come to that decision? There's a lot of different stuff out there, some good, some terrible.
Printable View
What brand, type, weight and diameter are you using on different built SBC engines? Also how did you come to that decision? There's a lot of different stuff out there, some good, some terrible.
RPM and Budget.
more RPMS you plan on running, the better the balancer you would need.
I would recommend an ATI.
I always had good luck out of them, and they are a reputable company. Plus they can be sent back in to be checked if there is any questioning it. I always ran the 8" balancers.
I ran a UMP modified, and was turning 8-8200 RPM
JMO though
ATI is all we have ran for over 20 years , you can buy the O-ring kit from them and rebuild them your self , so unless damaged , the shells will last you for ever .....
ATI is likely the best...but I have a Fluid Damper that came with my engine so that's what I will use.
it will work , supposedly , they had some issues at very high RPM,s but i dont think you are turning your engines that much , any way , any of them is better than those rattlers they were pushing several years ago.......