Originally Posted by
dirty white boy
depending on amount of suspension travel to how much yoke you need hanging out of trans,..1 1/2 to 2 1/2 be close,..if you bought a longer than stock yoke an did not machine out put shaft then itll bottom out inside trans on shaft flange an not shaft bottom out in yoke, an depending on type suspension as to how much pinion angle,1 degree not near nuff,..4 degrees seem conservative still,...on leafs 6 degrees is bout normal up to 8-9 degrees extream...had a car keep spittin shafts,turned out yoke nut backed off just enuff to let pinion bottum out against spool an bind up,...good luck