Search:

could also try dropping left side % some and increasing rear % a little bit. or try flip flopping the front springs.

what wheel offsets you running?

We cant run a 3 wheel setup on car either so what i did was get the hawk black brake pads for both rears and the lf and just put a cheap parts store one on the rf and it will help the lf grab alot...

My bad, Yeh would be 170 not 270, but I'm sure he got the theory i was going toward.

For every .1 in rear end gear you go or Final drive it is equal to about 100 rpms. Going from a 6.33 to 6.50 would only be about 270 rpms more roughly, plus going to a bigger tire is going to take...

I had a 60in floater in my car with pinion center and ran a 3in offset on the lr and 4in offset on the rr, it got bent i now have a 58in floater in my car also with pinion center and i still run 4in...

What is your cross right now. adding cross will give you more LR bite RR bite is wrong and could be that your cross is way to low. and those springs seem high on the front

We were out of town this weekend but can get cast numbers tonight. and dont have any under drive pulley sets and the round tooth adjuster was sold on racecar with motor. sorry

$2000 plus shipping for everything including 2 additional 2.3 blocks still in great condition. The worked 2300 head is NOT included in the $2000. It will be sold at a separate price.

-Have a complete intake to oil pan 2.3 E89 small journal crank motor. Head is a 8 plug head but block is in perfect condition.
-Have a 2.3 short block 2 races old. (ears on the block to mount to...

jeff i will take any help i can get. have read alot of stuff about you and for most part everyone seems to thank the help you have given them.

yeh it is totally not a one person job and if u dont have a cleco kit i recommend getting one

we have a metric chassis that has been clipped in the front with a camaro front clip. i was wondering if anyone could give me some basic setup notes for this setup as i am new to street stocks. we...

we bought a monte carlo body from performance bodies. the door skins have about a 1-2in on each side to pop rivet to. the body went together so easy also.